McIntosh takes particular care and attention to the performance, ergonomics and quality of our all our products. Nowhere is this more evident than in their Preamplifiers. McIntosh's Audio and Video Preamplifiers are exceptionally easy to use, even in a darkened home theater. Their feel and familiarity immediately invite you to explore your McIntosh System, significantly enhancing your ownership experience.


A flexible yet purist design that maintains the highest quality two channel audio performance
McIntosh's many years expertise in tube design and newly developed control circuits. It has all the flexibility modern systems require while maintaining the highest quality two channel performance.
As an example, all signal switching is done inside glass cylinders filled with inert gas. These switches are located adjacent to the input/output jacks, virtually eliminating crosstalk. Switch cleaning is a thing of the past.
Particular attention has been paid to the MM Phono Input. Its innovative circuit incorporates time-proven 12AX7 vacuum tubes. The brilliance of its design is reflected in both its simplicity and superior performance.
Electronic, independent adjustment level settings for each of the eight source inputs from either the front panel or remote control. Channel Balance is electronically adjusted and stored in memory. Bass and Treble controls are included and will prove invaluable for older recordings or may be bypassed when not needed.
To experience the legendary performance of McIntosh, please call on us at
860-523-7250 or stop by for a visit. Driving Directions
| Dimensions | Height, 6.0in, X Width, 17.5in, X Depth, 18.0in |
| Freq range | 20Hz-20kHz |
| THD | 0.08% from 20Hz to 20,000Hz |
| Input Versatility |
7 Unbalanced High-Level Inputs 2 Balanced (XLR) Inputs 1 Moving Magnet Phono Input |
| S/N Ratio | 90dB |
| Net Weight | 21lbs |
| $3,995.00 |

This new preamplifier from McIntosh is truly extraordinary audio preamplifier. It combines the warmth and musicality of vacuum tubes with 21st century engineering enhancements for a truly extraordinary sounding preamplifier!
Six 12XA7 audio vacuum tubes will release the magic and passion in all of your music. For all you vinyl lovers there are two vacuum tube phono stages; one for moving magnet phono cartridges, and one for moving coil cartridges. There is also the ability to adjust the load and resistance of the phono cartridge from the comfort of your favorite listening position by using the remote control!
Eight inputs incorporating McIntosh proven silent electro-magnetic switching that are not only dead quiet, but makes switch cleaning a thing of the past! With their classic blue meters and their well-crafted large metal rotary controls make for a preamplifier that looks as beautiful as the music it creates!
To experience the legendary performance of McIntosh, please call us at
860-523-7250 or stop by for a visit. Driving Directions
| Dimensions | Height, 7.2in, X Width, 17.5in, X Depth, 14.5in |
| Freq range | 10Hz-100kHz |
| THD | .008% THD from 20Hz-20kHz |
| Input Versatility |
8 Unbalanced High-Level Inputs 4 Balanced (XLR) Inputs Vacuum Tube Moving Coil and Moving Magnet Phono Preamplifiers |
| S/N Ratio | 93dB |
| Net Weight | 29.5lbs |
| $5,995.00 |

The new incredible sounding McIntosh C-500 preamplifier uses two separate chassis to keep noise from entering the delicate preamplifier circuits; this is a no-holes barred design.
The Dual Chassis design completely separates all power
supply, microprocessor and control circuits from the pure audio circuits for total noise isolation. To further aid in channel isolation the circuitry for both channels is totally separate, physically isolated and shielded. The C500 incorporates two identical power supplies one for each channel, to help assure total channel isolation.
This dual-mono preamplifier is available with your choice of either solid-state or vacuum tube electronics. There are separated dedicated moving coil and moving magnet phono stages for your turntable that are fully adjustable with either the front panel controls or the remote! The volume control is a balanced design that assures accurate volume tracking and extremely low noise.
This is a preamplifier that will provide you with the utmost musical performance and give you enjoyment and pleasure for many years to come!
To experience the legendary performance of McIntosh, please call us at
860-523-7250 or stop by for a visit. Driving Directions
| Dimensions | Height, 6.0in, X Width, 17.5in, X Depth, 19.0in |
| Freq range | 13Hz-30kHz |
| THD | 92dB spl (2.83v, 1m) |
| Input Versatility |
4 Unbalanced High-Level Inputs 4 Balanced (XLR) Inputs Vacuum Tube Moving Coil and Moving Magnet Phono Preamplifiers |
| S/N Ratio | 93dB (Tube) |
| Net Weight | 28.2lbs |
| $11,995.00 |

The debate over whether tubes or transistors sound better is still going strong after forty years.
McIntosh has led in both technologies, and has just raised the bar again, with the C1000, The C-1000 is a three-chassis design that offers the ultimate in flexibility. It lets the listener choose between a solid-state preamplifier, vacuum tube preamplifier, or both. All three modules can be combined with each source available through either preamplifier module, selectable at the push of a remote control button. For ultimate stereo fidelity the preamplifier modules employ Dual Mono topologies yielding over 130 dB of channel separation.
The C1000 Preamplifiers with a Controller are the finest audio preamplifiers McIntosh has ever created. No design compromises were allowed in the quest for a preamplifier, both Solid State and Tube with absolute accuracy, total sonic purity and virtual elimination of distortion and audible noise. For those who have been searching for the "Best in Preamplifiers", your wait is over.
| Dimensions | Height, 6.0in, X Width, 17.5in, X Depth, 18.8in |
| Freq range | 10Hz-40kHz |
| THD | .002% THD from 20Hz-20Khz |
| Input Versatility |
4 Unbalanced High-Level Inputs 4 Balanced (XLR) Inputs Vacuum Tube Moving Coil and Moving Magnet Phono Preamplifiers |
| S/N Ratio | 93dB (Tube) |
| Net Weight | 39lbs (C-1000c) |
| $19,995.00-$29,995.00 |
McIntosh MEN-220 Room Correction System
"This could be the biggest advance in audio since the 2nd speaker!"
In the late 70's, McIntosh realized how much influence the room had in accurate and musical sound reproduction. If you had connected the exact identical audio components in two different listening rooms, you would result in two different sounding audio systems! In response to this, McIntosh Designed and manufactured the MQ-104 Environmental Room Equalizer. The Stereo Shop would go to the client's home with a third octive acoustic analyzer, install a MQ-104 and calibrate it to their audio system to correct room anomalies. The difference in the quality of the music reproduction was remarkable; imaging would improve greatly, life-like clarity and lack of "boomy" mid-bass response. It was like rediscovering your music all over again! Now we fast forward to 2011; McIntosh has developed the latest advance in acoustic room correction, the MEN-220! The McIntosh MEN-220 addresses many different factors that can hinder your audio system from performing its best, including speaker placement, and most importantly, the room itself! Many audiophiles consider the listening room to be the "fourth component", and there was little that could be done to correct these issues, until now!
How the MEN-220 accomplishes this is by utilizing the supplied laboratory grade microphone and stand to acoustically measure the various positions of your listening room. The microphone is positioned in the first listening location or "Focus Point", and then the MEN-220 will play a multitude of audio frequencies to take an acoustic "snap shot" of your listening position. The information is then stored in the units memory, and by placing the microphone in different locations in your room, the MEN-220 listens how the room is acoustically configured, for example, how high the ceilings are, various room reflections, and where the loudspeakers are located. When sufficient amount of "Room Knowledge" is obtained, the MEN-220 uses its sophisticated processing to automatically create an acoustically correct response. With the McIntosh MEN-220, will allow you to preset as many as eight "Focus Points'; so if you enjoy listening to music in several different locations in your room, this unit will assure that you'll always have "the best seat in the house", regardless where you sit to listen to your music! There are two additional settings that include a "Global" which insures everyone in the listening room will have the same great experience, and "By-Pass" setting which eliminates any of the room calibration processing, to hear the before and after difference in the music with the MEN-220. The McIntosh MEN-220 offers is the ability to easily integrate subwoofers into your system, and then again utilize the Room Perfect EQ processing to greatly simplify subwoofer placement and calibration that results in low bass frequencies that are deep and extremely musically accurate bass response that is nothing short than breathtaking!
The McIntosh MEN-220 could be the most exciting development in audio since stereo itself! This remarkable unit is now on display; come on in to experience it for yourself and prepared to be amazed!
What was true in 1949 remains true today; customers trust McIntosh to combine extraordinary engineering and performance with heirloom-quality construction in every product.


